Step2 Chair Back Replacement: Fit and Installation Tips

By Kids Toys, Playhouses, Wagons & Outdoor Products | Published: 2026-10-31

Category: How-to Guides

Learn how to replace a Step2 chair back for models 8968 and 8967. This guide covers fit checks, tools, and step-by-step installation tips.

Quick answer

To replace a Step2 chair back for models 8968 or 8967, you need the correct TD brown part (SKU 161972A01X), basic tools, and patience—no special skills required.

Before you start: model and part check

The Step2 chair back replacement part (SKU 161972A01X) is designed specifically for models 8968 and 8967. It comes in a TD brown finish. Double-check your chair model number—usually stamped on the underside or back of the seat—to confirm compatibility before ordering.

If you have a different model or a different color, this part may not fit. Step2 offers a range of replacement parts, but color and model matching is essential.

Tools you may need

Most Step2 chair backs attach with screws or snap-in tabs. Have a Phillips-head screwdriver and a flat-head screwdriver on hand. For stubborn parts, a small pry tool or a butter knife can help gently separate plastic tabs without breaking them.

Step-by-step installation guide

Remove the old chair back: Turn the chair over and inspect the attachment points. If screws are present, remove them with a Phillips screwdriver. If the back is held by snap-in tabs, press the tabs inward while pulling the back away from the seat. Work slowly to avoid cracking the plastic. Common mistake: pulling too hard can break the tabs. Use gentle pressure and wiggle the part loose.
Align the new chair back: Position the new TD brown chair back against the seat frame, ensuring the screw holes or tab slots line up exactly. Do not force it—if it doesn't align, check that you have the correct model (8968 or 8967) and that no debris is blocking the slots. Checkpoint: If the part doesn't sit flush, stop and verify compatibility. Forcing it may damage the new part or the chair.
Secure the chair back: Insert screws through the holes and tighten them snugly—do not overtighten, as plastic can crack. For tab-style attachments, press the back firmly until you hear a click, indicating the tabs have locked into place. Test the back by gently pulling on it to confirm it's secure. Common mistake: overtightening screws can strip the plastic threads. Stop turning as soon as the screw is snug.

Product details

CHAIR BACK - REV (TD BROWN) 8968 8967: CHAIR BACK - REV (TD BROWN) 8968 8967 is a replacement chair back from Step2, listed under individual replacement parts. It is intended for use with the 8968 and 8967 models and is available in a TD brown finish. Brand: Step2. Part type: Individual replacement part. Color: TD brown. Compatible model numbers referenced: 8968 and 8967. SKU: 161972A01X. Ordering the exact SKU ensures the part matches the original fit and color, avoiding returns or modification hassles.
CHAIR BACK - REV (TD BROWN) 8968 8967