How to Replace a Step2 Stove Top Decal (Storybook Cottage)

Quick Answer

To replace the Step2 Stove Top Decal on your Storybook Cottage, remove the old decal residue, clean the surface, and apply the new decal (part 191103) slowly from one edge to avoid bubbles.

Step-by-Step Replacement Process

1. Remove the Old Decal: Gently peel off the old decal from one corner. If it's stuck, use a hairdryer on low heat to soften the adhesive, then lift slowly. Scrape off any leftover adhesive with your fingernail or a plastic scraper. Avoid using metal tools that could scratch the playhouse surface.
2. Clean the Surface: Wipe the stove area with a damp cloth and mild soap to remove dust and grease. Dry thoroughly with a lint-free cloth. Any moisture or debris will cause bubbles under the new decal. A clean, dry surface is essential for the decal to stick evenly.
3. Position the New Decal: Peel a small section of the backing paper from one edge of the decal. Align that edge with the stove cutout, then slowly peel the rest of the backing while smoothing the decal onto the surface with a credit card or squeegee. Work from the center outward to push air bubbles to the edges. If a bubble remains, lift the decal slightly and re-smooth.
4. Press and Seal: Once the decal is fully applied, press firmly over the entire surface with a soft cloth. Pay extra attention to the edges to prevent peeling later. Wait at least 24 hours before cleaning or exposing the decal to water.

What You'll Need

• Stove Top Decal (Storybook Cottage) (191103): Stove Top Decal (Storybook Cottage) is a replacement part identified by code 191103 and branded by Step2. It is listed under individual replacement parts for the Storybook Cottage playhouse. This decal is specifically designed for the Storybook Cottage, so you can be confident it will fit the stove cutout perfectly.